Construction products - harmonised area

 

Competent authority

Ministry of Physical Planning, Construction and State Assets
Ulica Republike Austrije 20, 10000 Zagreb

 

PRODUCT CONTACT POINT FOR CONSTRUCTION

Phone: 00385 1 3782 444
e-mail: cpr.kontaktnatocka@mpgi.hr

 


Link to the TRIS database

In the TRIS database you can look up the notification of the technical rule

 


Market Surveillance Authority

State Inspectorate
pisarnica.dirh@dirh.hr

 

Catalogue of Croatian Standards

 

TYPE OF PRODUCT
 

  1. Flued oil stoves with vaporizing burners
 
  1. Lighting columns -- Part 4: Requirements for reinforced and prestressed concrete lighting columns
 
  1. Lighting columns -- Part 5: Requirements for steel lighting columns
 
  1. Lighting columns -- Part 6: Requirements for aluminium lighting columns
 
  1. Lighting columns -- Part 7: Requirements for fibre reinforced polymer composite lighting columns
 
  1. Fire detection and fire alarm systems -- Part 2: Control and indicating equipment
 
  1. Fire detection and fire alarm systems -- Part 2: Control and indicating equipment
 
  1. Fire detection and fire alarm systems -- Part 3: Fire alarm devices -- Sounders
 
  1. Fire detection and fire alarm systems -- Part 3: Fire alarm devices -- Sounders
 
  1. Fire detection and fire alarm systems -- Part 4: Power supply equipment
 
  1. Fire detection and fire alarm systems -- Part 4: Power supply equipment
 
  1. Fire detection and fire alarm systems -- Part 5: Heat detectors -- Point heat detectors
 
  1. Fire detection and fire alarm systems -- Part 7: Smoke detectors -- Point smoke detectors that operate using scattered light, transmitted light or ionization
 
  1. Fire detection and fire alarm systems -- Part 10: Flame detectors -- Point detectors
 
  1. Fire detection and fire alarm systems -- Part 10: Flame detectors -- Point detectors
 
  1. Fire detection and fire alarm systems -- Part 11: Manual call points
 
  1. Fire detection and fire alarm systems -- Part 11: Manual call points
 
  1. Fire detection and fire alarm systems -- Part 12: Smoke detectors -- Line detectors using an optical beam
 
  1. Fire detection and fire alarm systems -- Part 16: Voice alarm control and indicating equipment
  2. Fire detection and fire alarm systems -- Part 17: Short circuit isolators
 
  1. Fire detection and fire alarm systems -- Part 18: Input/output devices
 
  1. Fire detection and fire alarm systems -- Part 20: Aspirating smoke detectors
 
  1. Fire detection and fire alarm systems -- Part 21: Alarm transmission and fault warning routing equipment
 
  1. Fire detection and fire alarm systems -- Part 23: Fire alarm devices -- Visual alarm devices
 
  1. Fire detection and fire alarm systems -- Part 24: Components of voice alarm systems -- Loudspeakers
 
  1. Fire detection and fire alarm systems -- Part 25: Components using radio links
 
  1. Fire detection and fire alarm systems -- Part 25: Components using radio links
 
  1. Building hardware -- Emergency exit devices operated by a lever handle or push pad, for use on escape routes -- Requirements and test methods
 
  1. Cement -- Part 1: Composition, specifications and conformity criteria for common cements
 
  1. Vitrified clay pipe systems for drains and sewers -- Part 1: Requirements for pipes, fittings and joints
 
  1. Vitrified clay pipe systems for drains and sewers -- Part 4: Requirements for adaptors, connectors and flexible couplings
 
  1. Vitrified clay pipe systems for drains and sewers -- Part 5: Requirements for perforated pipes and fittings
 
  1. Vitrified clay pipes systems for drain and sewers -- Part 6: Requirements for components of manholes and inspection chambers
 
  1. Vitrified clay pipe systems for drains and sewers -- Part 7: Requirements for pipes and joints for pipe jacking
 
  1. Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
 
  1. Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
  2. Masonry cement -- Part 1: Composition, specifications and conformity criteria
 
  1. Single burner gas-fi red overhead radiant tube heaters for non-domestic use -- Part 1: Safety
 
  1. High-pressure decorative laminates (HPL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
 
  1. Radiators and convectors -- Part 1: Technical specifications and requirements
 
  1. Fly ash for concrete -- Part 1: Definition, specifications and conformity criteria
 
  1. Building lime -- Part 1: Definitions, specifications and conformity criteria
 
  1. Concrete roofing tiles and fittings for roof covering and wall cladding -- Product specifications
 
  1. Fibre-cement slates and fittings -- Product specification and test methods
 
  1. Fibre-cement profiled sheets and fittings -- Product specification and test methods
 
  1. Prefabricated accessories for roofing -- Installations for roof access -- Walkways, treads and steps
 
  1. Prefabricated accessories for roofing -- Roof safety hooks
 
  1. Gypsum plasterboards -- Definitions, requirements and test methods
 
  1. Steel strip sheaths for prestressing tendons -- Terminology, requirements, quality control
 
  1. Corrugated bitumen sheets -- Product specification and test methods
 
  1. Bitumen shingles with mineral and/or synthetic reinforcements -- Product specification and test methods
 
  1. Glass in building -- Basic soda lime silicate glass products -- Part 9: Evaluation of conformity/Product standard
 
  1. Fibre cement pipes for drains and sewers -- Part 2: Manholes and inspection chambers
 
  1. Ductile iron pipes, fittings, accessories and their joints for sewerage applications -- Requirements and test methods
 
  1. Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
 
  1. Fixed firefighting systems -- Hose systems -- Part 1: Hose reels with semi-rigid hose
 
  1. Fixed firefighting systems -- Hose systems -- Part 2: Hose systems with lay-flat hose
 
  1. Elastomeric seals -- Material requirements for pipe joint seals used in water and drainage applications -- Part 1: Vulcanized rubber
 
  1. Elastomeric seals -- Material requirements for pipe joint seals used in water and drainage applications -- Part 1: Vulcanized rubber
 
  1. Elastomeric seals -- Material requirements for pipe joint seals used in water and drainage applications -- Part 2: Thermoplastic elastomers (EN 681-2:2000+A1:2002)
 
  1. Elastomeric seals -- Material requirements for pipe joint seals used in water and drainage applications -- Part 2: Thermoplastic elastomers (EN 681-2:2000+A1:2002)
 
  1. Elastomeric seals -- Materials requirements for pipe joint seals used in water and drainage applications -- Part 3: Cellular materials of vulcanized rubber
 
  1. Elastomeric seals -- Material requirements for pipe joint seals used in water and drainage applications -- Part 3: Cellular materials of vulcanized rubber
 
  1. Elastomeric seals -- Material requirements for pipe joint seals used in water and drainage applications -- Part 4: Cast polyurethane sealing elements
 
  1. Elastomeric seals -- Material requirements for pipe joint seals used in water and drainage applications -- Part 4: Cast polyurethane sealing elements
 
  1. Elastomeric seals -- Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
 
  1. Specification for masonry units -- Part 1: Clay masonry units
 
  1. Specification for masonry units -- Part 2: Calcium silicate masonry units
 
  1. Specification for masonry units - Part 3: Aggregate concrete masonry units
 
  1. Specification for masonry units -- Part 4: Autoclaved aerated concrete masonry units
 
  1. Specification for masonry units -- Part 5: Manufactured stone masonry units
 
  1. Specification for masonry units -- Part 6: Natural stone masonry units
 
  1. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 1: System D -- Safety
 
  1. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 2: System E -- Safety
 
  1. Multi-burner gas-fired overhead radiant tube heater systems for non domestic use -- Part 3: System F -- Safety
 
  1. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 4: System H -- Safety
 
  1. Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
 
  1. Specification for ancillary components for masonry -- Part 1: Wall ties, tension straps, hangers and brackets
 
  1. Specification for ancillary components for masonry -- Part 2: Lintels
 
  1. Specification for ancillary components for masonry -- Part 3: Bed joint reinforcement of steel meshwork
 
  1. Separator systems for light liquids (e.g. oil and petrol) -- Part 1: Principles of product design, performance and testing, marking and quality control
 
  1. Separator systems for light liquids (e.g. oil and petrol) -- Part 1: Principles of product design, performance and testing, marking and quality control
 
  1. Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings -- Requirements, test methods and quality assurance
 
  1. Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings -- Requirements, test methods and quality assurance
 
  1. Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings -- Requirements, test methods and quality assurance
 
  1. Admixtures for concrete, mortar and grout -- Part 2: Concrete admixtures -- Definitions, requirements, conformity, marking and labelling
 
  1. Admixtures for concrete, mortar and grout -- Part 3: Admixtures for masonry mortar -- Definitions, requirements, conformity and marking and labelling
 
  1. Admixtures for concrete, mortar and grout -- Part 4: Admixtures for grout for prestressing tendons -- Definitions, requirements, conformity, marking and labelling
 
  1. Admixtures for concrete, mortar and grout -- Part 5: Admixtures for sprayed concrete -- Definitions, requirements, conformity, marking and labelling
 
  1. Ductile iron pipes, fittings, accessories and their joints for gas pipelines -- Requirements and test methods
 
  1. WC pans and WC suites with integral trap
 
  1. WC pans and WC suites with integral trap
 
  1. Specification for mortar for masonry -- Part 1: Rendering and plastering mortar
 
  1. Specification for mortar for masonry -- Part 2: Masonry mortar
 
  1. Light transmitting single skin profield plastics sheets for internal and external roofs, walls and ceilings -- Requirements and test methods
 
  1. Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
 
  1. Glass in building -- Mirrors from silver-coated float glass for internal use -- Part 2: Evaluation of conformity; product standard
 
  1. Glass in building -- Glass blocks and glass pavers -- Part 2: Evaluation of conformity/ Product standard
 
  1. Copper and copper alloys -- Seamless, round copper tubes for water and gas in sanitary and heating applications
 
  1. Execution of steel structures and aluminium structures -- Part 1: Requirements for conformity assessment of structural components
 
  1. Glass in building -- Coated glass -- Part 4: Product standard
 
  1. Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems -- Part 1: Requirements, testing, quality control
 
  1. Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems -- Part 1: Requirements, testing, quality control
 
  1. Building hardware -- Panic exit devices operated by a horizontal bar, for use on escape routes -- Requirements and test methods
 
  1. Building hardware -- Controlled door closing devices -- Requirements and test methods
 
  1. Building hardware -- Electrically powered hold-open devices for swing doors -- Requirements and test methods
 
  1. Building hardware -- Door cordinator devices -- Requirements and test methods
 
  1. Precast concrete products -- Hollow core slabs
 
  1. Glass in building -- Insulating glass units -- Part 5: Product standard
 
  1. Clay roofing tiles and fittings -- Product definitions and specifications
 
  1. Road restraint systems -- Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
 
  1. Road restraint systems -- Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
 
  1. Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
 
  1. Structural bearings -- Part 3: Elastomeric bearings
 
  1. Structural bearings -- Part 4: Roller bearings
 
  1. Structural bearings -- Part 4: Roller bearings
 
  1. Structural bearings -- Part 5: Pot bearings
 
  1. Structural bearings -- Part 6: Rocker bearings
 
  1. Structural bearings -- Part 7: Spherical and cylindrical PTFE bearings
 
  1. Structural bearings -- Part 8: Guide Bearings and Restraint Bearings
 
  1. Concrete paving blocks -- Requirements and test methods
 
  1. Concrete paving blocks -- Requirements and test methods
 
  1. Concrete paving flags -- Requirements and test methods
 
  1. Concrete paving flags -- Requirements and test methods
 
  1. Concrete kerb units -- Requirements and test methods
 
  1. Concrete kerb units -- Requirements and test methods
 
  1. Slabs of natural stone for external paving -- Requirements and test methods
 
  1. Setts of natural stone for external paving -- Requirements and test methods
 
  1. Kerbs of natural stone for external paving -- Requirements and test methods
 
  1. Clay pavers -- Requirements and test methods
 
  1. Clay pavers -- Requirements and test methods
 
  1. Road marking materials -- Drop on materials -- Glass beads, antiskid aggregates and mixtures of the two
 
  1. Road marking materials -- Drop on materials -- Glass beads, antiskid aggregates and mixtures of the two
 
  1. Drainage channels for vehicular and pedestrian areas -- Classification, design and testing requirements, marking and evaluation of conformity
 
  1. Drainage channels for vehicular and pedestrian areas -- Classification, design and testing requirements, marking and evaluation of conformity
 
  1. Chimneys -- Clay/ceramic flue liners -- Part 1: Flue liners operating under dry conditions -- Requirements and test methods
 
  1. Chimneys -- Clay/ceramic flue liners -- Part 2: Flue liners operating under wet conditions -- Requirements and test methods
 
  1. Road marking materials -- Retroreflecting road studs -- Part 1: Initial performance requirements
 
  1. Natural stone products -- Slabs for cladding -- Requirements
 
  1. Products and systems for the protection and repair of concrete structures -- Definitions, requirements, quality control and evaluation of conformity -- Part 2: Surface protection systems for concrete
 
  1. Products and systems for the protection and repair of concrete structures -- Definitions, requirements, quality control and evaluation of conformity -- Part 3: Structural and non-structural repair
 
  1. Products and systems for the protection and repair of concrete structures -- Definitions, requirements, quality control and evaluation of conformity -- Part 4: Structural bonding
 
  1. Products and systems for the protection and repair of concrete structures -- Definitions, requirements, quality control and evaluation of conformity -- Part 5: Concrete injection
 
  1. Products and systems for the protection and repair of concrete structures -- Definitions, requirements, quality control and evaluation of conformity -- Part 6: Anchoring of reinforcing steel bar
 
  1. Products and systems for the protection and repair of concrete structures -- Definitions, requirements, quality control and evaluation of conformity -- Part 7: Reinforcement corrosion protection
 
  1. Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
 
  1. Glass in building -- Special basic products -- Borosilicate glasses -- Part 1-2: Evaluation of conformity/ Product standard
 
  1. Glass in building -- Special basic products -- Glass ceramics -- Part 2-2: Evaluation of conformity/ Product standard
 
  1. Chimneys -- Clay/ceramic flue blocks for single wall chimneys -- Requirements and test methods
 
  1. Grease separators -- Part 1: Principles of design, performance and testing, marking and quality control
 
  1. Grease separators -- Part 1: Principles of design, performance and testing, marking and quality control
 
  1. Chimneys -- Requirements for metal chimneys -- Part 1: System chimney products
 
  1. Chimneys -- Requirements for metal chimneys -- Part 2: Metal flue liners and connecting flue pipes
 
  1. Chimneys -- Components -- Concrete flue liners
 
  1. Chimneys -- Components -- Concrete flue blocks
 
  1. Glass in building -- Heat strengthened soda lime silicate glass -- Part 2: Evaluation of conformity/Product standard
 
  1. Prefabricated accessories for roofing -- Individual roof lights of plastics -- Product specification and test methods
 
  1. Concrete pipes and fittings, unreinforced, steel fibre and reinforced
 
  1. Concrete pipes and fittings, unreinforced, steel fibre and reinforced
 
  1. Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
 
  1. Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
 
  1. Building hardware -- Single-axis hinges -- Requirements and test methods
 
  1. Building hardware -- Single-axis hinges -- Requirements and test methods
 
  1. Hot rolled products of structural steels -- Part 1: General technical delivery conditions
 
  1. Stainless steels -- Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
 
  1. Stainless steels -- Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
 
  1. Hot finished structural hollow sections of non-alloy and fine grain steels -- Part 1: Technical delivery conditions
 
  1. Cold formed welded structural hollow sections of non-alloy and fine grain steels -- Part 1: Technical delivery conditions
 
  1. Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption -- Technical delivery conditions
 
  1. Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption -- Technical delivery conditions
 
  1. Non-Alloy steel tubes suitable for welding and threading -- Technical delivery conditions
 
  1. Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
 
  1. Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption -- Technical delivery conditions
 
  1. Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption -- Technical delivery conditions
 
  1. Steel castings for structural uses
 
  1. Steel castings for structural uses
 
  1. Steels for quenching and tempering for construction purposes -- Technical delivery conditions
 
  1. Adhesives for tiles -- Requirements, evaluation of conformity, classification and designation
 
  1. Wastewater lifting plants for buildings and sites -- Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter
 
  1. Wastewater lifting plants for buildings and sites -- Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater
 
  1. Wastewater lifting plants for buildings and sites -- Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications
 
  1. Wastewater lifting plants for buildings and sites -- Principles of construction and testing -- Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
 
  1. Natural stone products -- Modular tiles --Requirements
 
  1. Natural stone products -- Slabs for floors and stairs -- Requirements
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 1: Requirements and test methods for electrical automatic control and delay devices
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 2: Requirements and test methods for non-electrical automatic control and delay devices
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 3: Requirements and test methods for manual triggering and stop devices
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 4: Requirements and test methods for container valve assemblies and their actuators
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 6: Requirements and test methods for non-electrical disable devices
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 7: Requirements and test methods for nozzles for CO2 systems
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 8: Requirements and test methods for connectors
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 9: Requirements and test methods for special fire detectors
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 10: Requirements and test methods for pressure gauges and pressure switches
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 11: Requirements and test methods for mechanical weighing devices
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 12: Requirements and test methods for pneumatic alarm devices
 
  1. Fixed firefighting systems -- Components for gas extinguishing systems -- Part 13: Requirements and test methods for check valves and non-return valves
 
  1. Smoke and heat control systems -- Part 1: Specification for smoke barriers
  2. Smoke and heat control systems -- Part 2:Specification for natural smoke and heat exhaust ventilators
 
  1. Smoke and heat control systems -- Part 3: Specification for powered smoke and heat control ventilators (fans)
 
  1. Smoke and heat control systems -- Part 6: Specification for pressure differential systems -- Kits
 
  1. Smoke and heat control systems -- Part 7: Smoke duct sections
 
  1. Smoke and heat control systems -- Part 8: Smoke control dampers
 
  1. Smoke and heat control systems -- Part 10: Power supplies
 
  1. Glass in building -- Thermally toughened soda lime silicate safety glass -- Part 2: Evaluation of conformity/Product standard
 
  1. Building hardware -- Locks and latches -- Mechanically operated locks, latches and locking plates -- Requirements and test methods
 
  1. Fixed firefighting systems -- Components for sprinkler and water spray systems -- Part 1: Sprinklers
 
  1. Fixed firefighting systems -- Components for sprinkler and water spray systems -- Part 2: Wet alarm valve assemblies
 
  1. Fixed firefighting systems -- Components for sprinkler and water spray systems -- Part 2: Wet alarm valve assemblies
 
  1. Fixed firefighting systems -- Components for sprinkler and water spray systems -- Part 3: Dry alarm valve assemblies
 
  1. Fixed firefighting systems -- Components for sprinkler and water spray systems -- Part 3: Dry alarm valve assemblies
 
  1. Fixed firefighting systems -- Components for sprinkler and water spray systems -- Part 4: Water motor alarms
 
  1. Fixed firefighting systems -- Components for sprinkler and water spray systems -- Part 5: Water flow detectors
 
  1. Surface dressing -- Requirements
 
  1. Slurry surfacing -- Requirements
 
  1. Workshop fabricated steel tanks -- Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
 
  1. Slate and stone for discontinuous roofing and external cladding -- Part 1: Specifications for slate and carbonate slate
 
  1. Glass in building -- Chemically strengthened soda lime silicate glass -- Part 2: Evaluation of conformity/Product standard
 
  1. Traffic control equipment -- Warning and safety light devices
 
  1. Traffic control equipment -- Signal heads
  2.  
 
  1. Air admittance valves for drainage systems -- Requirements, tests methods and evaluation of conformity
 
  1. Chimneys -- Components -- Concrete outer wall elements
 
  1. Fibre-cement flat sheets -- Product specification and test methods
 
  1. Small wastewater treatment systems for up to 50 PT -- Part 1: Prefabricated septic tanks
 
  1. Small wastewater treatment systems for up to 50 PT -- Part 1: Prefabricated septic tanks
 
  1. Small wastewater treatment systems for up to 50 PT -- Part 3: Packaged and/or site assembled domestic wastewater treatment plants
 
  1. Small wastewater treatment systems for up to 50 PT -- Part 4: Septic tanks assembled in situ from prefabricated kits
 
  1. Small wastewater treatment systems for up to 50 PT -- Part 6: Prefabricated treatment units for septic tank effluent
 
  1. Small wastewater treatment systems for up to 50 PT -- Part 7: Prefabricated tertiary treatment units
 
  1. Bitumen and bituminous binders -- Specifications for paving grade bitumens
 
  1. Prefabricated reinforced components of autoclaved aerated concrete
 
  1. Aggregates for concrete
 
  1. Anti-glare systems for roads -- Part 1: Performance and characteristics
 
  1. Anti-glare systems for roads -- Part 1: Performance and characteristics
 
  1. Precast concrete products -- Floor slats for livestock
 
  1. Sanitary appliances -- Specification for whirlpool baths
 
  1. Precast concrete products -- Foundation piles
 
  1. Residential independent boilers fired by solid fuel -- Nominal heat output up to 50 kW -- Requirements and test methods
 
  1. Residential cookers fired by solid fuel -- Requirements and test methods
 
 
  1. Residential cookers fired by solid fuel -- Requirements and test methods
 
 
  1. Residential cookers fired by solid fuel -- Requirements and test methods
 
 
  1. Residential cookers fired by solid fuel -- Requirements and test methods
 
  1. Precast concrete products -- Elements for fences
 
  1. Precast concrete products -- Masts and poles
 
  1. Gypsum blocks -- Definitions, requirements and test methods
 
  1. Gypsum based adhesives for gypsum blocks -- Definitions, requirements and test methods
 
  1. Gypsum based adhesives for gypsum blocks -- Definitions, requirements and test methods
 
  1. Pigments for the colouring of building materials based on cement and/or lime -- Specifications and methods of test
 
  1. Fixed, vertical road traffic signs -- Part 1: Fixed signs
 
  1. Fixed, vertical road traffic signs -- Part 2: Transilluminated traffic bollards (TTB)
 
  1. Fixed, vertical road traffic signs -- Part 3: Delineator posts and retroreflectors
 
  1. Prefabricated accessories for roofing -- Permanently fixed roof ladders -- Product specification and test method
 
  1. Road vertical signs -- Variable message traffic signs -- Part 1: Product standard
 
  1. Glass in building -- Thermally toughened borosilicate safety glass -- Part 2: Evaluation of conformity/ Product standard
 
  1. Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
 
  1. Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
 
  1. Lightweight aggregates -- Part 1: Lightweight aggregates for concrete, mortar and grout
 
  1. Lightweight aggregates -- Part 1: Lightweight aggregates for concrete, mortar and grout
 
  1. Lightweight aggregates -- Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
 
  1. Chimneys -- System chimneys with clay/ceramic flue liners -- Part 1: Requirements and test methods for sootfire resistance
 
  1. Chimneys -- System chimneys with clay/ceramic flue liners -- Part 2: Requirements and test methods under wet conditions
 
  1. Chimneys -- System chimneys with clay/ceramic flue liners -- Part 3: Requirements and test methods for air flue system chimneys
 
  1. Chimneys -- Clay/ceramic outer walls for system chimneys -- Requirements and test methods
 
  1. Free-standing chimneys -- Part 5: Material for brick liners -- Product specifications
 
  1. Free-standing chimneys -- Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
 
  1. Steps for underground man entry chambers -- Requirements, marking, testing and evaluation of conformity
 
  1. Bituminous mixtures -- Material specifications -- Part 1: Asphalt Concrete
 
  1. Bituminous mixtures -- Material specifications -- Part 1: Asphalt Concrete
 
  1. Bituminous mixtures -- Material specifications -- Part 2: Asphalt Concrete for very thin layers
 
  1. Bituminous mixtures -- Material specifications -- Part 2: Asphalt Concrete for very thin layers
 
  1. Bituminous mixtures -- Material specifications -- Part 3: Soft Asphalt
 
  1. Bituminous mixtures -- Material specifications -- Part 3: Soft Asphalt
 
  1. Bituminous mixtures -- Material specifications -- Part 4: Hot Rolled Asphalt
 
  1. Bituminous mixtures -- Material specifications -- Part 4: Hot Rolled Asphalt
 
  1. Bituminous mixtures -- Material specifications -- Part 5: Stone Mastic Asphalt
 
  1. Bituminous mixtures -- Material specifications -- Part 5: Stone Mastic Asphalt
 
  1. Bituminous mixtures -- Material specifications -- Part 6: Mastic Asphalt
 
  1. Bituminous mixtures -- Material specifications -- Part 6: Mastic Asphalt
 
  1. Bituminous mixtures -- Material specifications -- Part 7: Porous Asphalt
 
  1. Bituminous mixtures -- Material specifications -- Part 7: Porous Asphalt
 
  1. Aggregates for mortar
 
  1. Aggregates for mortar
 
  1. Leak detection systems -- Part 1: General principles
 
  1. Thermal insulation products for buildings -- Factory made mineral wool (MW) products -- Specification
 
  1. Thermal insulation products for buildings-- Factory made expanded polystyrene (EPS) products -- Specification
 
  1. Thermal insulation products for buildings -- Factory made extruded polystyrene foam (XPS) products -- Specification
 
  1. Thermal insulation products for buildings -- Factory made rigid polyurethane foam (PU) products -- Specification
 
  1. Thermal insulation products for buildings -- Factory made phenolic foam (PF) products -- Specification
 
  1. Thermal insulation products for buildings -- Factory made cellular glass (CG) products -- Specification
 
  1. Thermal insulation products for buildings -- Factory made wood wool (WW) products -- Specification
 
  1. Thermal insulation products for buildings -- Factory made expanded perlite board (EPB) products -- Specification
 
  1. Thermal insulation products for buildings -- Factory made products of expanded cork (ICB) -- Specification
 
  1. Thermal insulation products for buildings -- Factory made wood fibre (WF) products -- Specification
 
  1. Precast concrete products -- Ribbed floor elements
 
  1. Precast concrete products -- Linear structural elements
 
  1. Inset appliances including open fires fired by solid fuels -- Requirements and test methods
 
  1. Inset appliances including open fires fired by solid fuels -- Requirements and test methods
 
  1. Inset appliances including open fires fired by solid fuels -- Requirements and test methods
 
  1. Inset appliances including open fires fired by solid fuels -- Requirements and test methods
 
  1. Inset appliances including open fires fired by solid fuels -- Requirements and test methods
 
  1. Room heaters fired by solid fuel -- Requirements and test methods
 
  1. Room heaters fired by solid fuel -- Requirements and test methods
 
  1. Room heaters fired by solid fuel -- Requirements and test methods
 
  1. Room heaters fired by solid fuel -- Requirements and test methods
 
  1. Industrial, commercial, garage doors and gates -- Product standard, performance characteristics
 
  1. Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
 
 
  1. Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications -- Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
 
  1. Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications -- Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
 
  1. Geotextiles and geotextile-related products -- Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
 
  1. Geotextiles and geotextile-related products -- Characteristics required for use in the construction of railways
 
 
  1. Geotextiles and geotextile-related products -- Characteristics required for use in earthworks, foundations and retaining structures
 
  1. Geotextiles and geotextile-related products -- Characteristics required for use in drainage systems
 
  1. Geotextiles and geotextile-related products -- Characteristics required for use in erosion control works (coastal protection, bank revetments)
 
  1. Geotextiles and geotextile-related products -- Characteristics required for the use in the construction of reservoirs and dams
 
  1. Geotextiles and geotextile-related products -- Characteristics required for use in the construction of canals
 
  1. Geotextiles and geotextile-related products -- Characteristics required for use in the construction of tunnels and underground structures
 
  1. Geotextiles and geotextile-related documents -- Characteristics required for use in solid waste disposals
 
  1. Silica fume for concrete -- Part 1: Definitions, requirements and conformity criteria
 
  1. Geotextiles and geotextile-related products -- Characteristics required for use in liquid waste containment projects
 
  1. Gypsum binders and gypsum plasters -- Part 1: Definitions and requirements
 
  1. Hydraulic road binders -- Part 1: Rapid hardening hydraulic road binders -- Composition, specifications and conformity criteria
 
  1. Kitchen sinks -- Functional requirements and test methods
 
  1. Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels -- Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 -- Requirements and test methods
 
  1. Geosynthetic barriers -- Characteristics required for use in the construction of reservoirs and dams
 
  1. Geosynthetic barriers -- Characteristics required for use in the construction of reservoirs and dams
 
  1. Geosynthetic barriers -- Characteristics required for use in the construction of canals
 
  1. Armourstone -- Part 1: Specification
 
  1. Armourstone -- Part 1: Specification
 
  1. Wall-hung urinals -- Functional requirements and test methods
 
  1. Aggregates for railway ballast
 
  1. Aggregates for railway ballast
 
  1. Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate -- Part 1: Definitions and requirements
 
  1. Welding consumables -- General product standard for filler metals and fluxes for fusion welding of metallic materials
 
  1. Geosynthetic barriers -- Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
 
  1. Geosynthetic barriers -- Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
 
  1. Geosynthetic barriers -- Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
 
  1. Geosynthetic barriers -- Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
 
  1. Geosynthetic barriers -- Characteristics required for use in the construction of solid wastestorage and disposal sites
 
  1. Chimneys -- Requirements and test methods for clay/ceramic flue terminals
 
  1. External blinds -- Performance requirements including safety
 
  1. Anti-flooding devices for buildings -- Part 1: Requirements
 
  1. Overfill prevention devices for static tanks for liquid petroleum fuels
 
  1. Overfill prevention devices for static tanks for liquid petroleum fuels
 
  1. Metal lath and beads -- Definitions, requirements and test methods -- Part 1: Internal plastering
 
  1. Metal lath and beads -- Definitions, requirements and test methods -- Part 2: External rendering
 
  1. Shutters -- Performance requirements including safety
 
  1. Precast concrete products -- Special roof elements
 
 
  1. Flexible sheets for waterproofing -- Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
 
  1. Precast concrete products -- Floor plates for floor systems
 
  1. Terrazzo tiles -- Part 1: Terrazzo tiles for internal use
 
  1. Terrazzo tiles -- Part 1: Terrazzo tiles for internal use
 
  1. Terrazzo tiles -- Part 1: Terrazzo tiles for internal use
 
  1. Terrazzo tiles -- Part 2: Terrazzo tiles for external use
 
  1. Bitumen and bituminous binders -- Framework for specifying cationic bituminous emulsions
  2. Screed material and floor screeds -- Screed material -- Properties and requirements
 
  1. Fibrous gypsum plaster casts -- Definitions, requirements and test methods
 
  1. Curtain walling -- Product standard
 
  1. Flexible sheets for waterproofing -- Definitions and characteristics of underlays -- Part 1: Underlays for discontinuous roofing
 
  1. Flexible sheets for waterproofing -- Definitions and characteristics of underlays -- Part 2: Underlays for walls
 
  1. Concrete pavements -- Part 3: Specifications for dowels to be used in concrete pavements
 
  1. Prefabricated gypsum plasterboard panels with a cellular paperboard core -- Definitions, requirements and test methods
 
  1. Bitumen and bituminous binders -- Specifications for hard paving grade bitumens
 
  1. Gypsum board thermal/acoustic insulation composite panels -- Definitions, requirements and test methods
 
  1. Flexible sheet for waterproofing -- Plastic and rubber sheets for roof waterproofing -- Definitions and characteristics
 
  1. Jointing materials for gypsum plasterboards -- Definitions, requirements and test methods
 
  1. Suspended ceilings -- Requirements and test methods
 
 
  1. Flexible sheets for waterproofing – Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
 
  1. Flexible sheets for waterproofing -- Bitumen damp proof sheets including bitumen basement tanking sheets -- Definitions and characteristics
 
  1. Flexible sheets for waterproofing -- Bitumen damp proof sheets including bitumen basement tanking sheets -- Definitions and characteristics
 
  1. Flexible sheets for waterproofing -- Bitumen water vapour control layers -- Definitions and characteristics
 
  1. Flexible sheets for waterproofing -- Bitumen water vapour control layers -- Definitions and characteristics
 
  1. Precast concrete products -- Precast concrete garages -- Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
 
  1. Flexible sheets for waterproofing -- Plastic and rubber vapour control layers -- Definitions and characteristics
 
  1. Wood-based panels for use in construction -- Characteristics, evaluation of conformity and marking
 
  1. Binders for magnesite screeds -- Caustic magnesia and magnesium chloride -- Part 1: Definitions, requirements
 
  1. Bitumen and bituminous binders -- Specification framework for polymer modified bitumens
 
  1. Free hanging heating and cooling surfaces for water with a temperature below 120°C -- Part 1: Pre-fabricated ceiling mounted radiant panels for space heating -- Technical specifications and requirements
 
  1. Resilient, textile and laminate floor coverings -- Essential characteristics
 
  1. WC and urinal flushing cisterns
 
  1. Thermal insulation products -- In-situ formed expanded clay lightweight aggregate products -- Part 1: Specification for the loose-fill products before installation
 
  1. Thermal insulation products for buildings -- In-situ formed loose-fill mineral wool (MW) products -- Part 1: Specification for the loosefill products before installation
 
  1. Timber structures -- Glued laminated timber and glued solid timber -- Requirements
 
  1. Timber structures -- Strength graded structural timber with rectangular cross section Part 1: General requirements
 
  1. Glass in building -- Basic alkaline earth silicate glass products -- Part 2: Evaluation of conformity/ Product standard
 
  1. Glass in building -- Heat soaked thermally toughened soda lime silicate safety glass -- Part 2: Evaluation of conformity/ Product standard
 
  1. Joint fillers and sealants -- Part 1: Specifications for hot applied sealants
 
  1. Joint fillers and sealants -- Part 2: Specifications for cold applied sealants
 
  1. Joint fillers and sealants -- Part 3: Specifications for preformed joint seals
 
  1. Gypsum board products from reprocessing -- Definitions, requirements and test methods
 
  1. Metal framing components for gypsum plasterboard systems -- Defi nitions, requirements and test methods
 
  1. Preformed plasterboard cornices -- Definitions, requirements and test methods
 
  1. Cement -- Composition, specifications and conformity criteria for very low heat special cements
 
  1. Structural timber -- Wood poles for overhead lines
 
  1. Gypsum elements for suspended ceilings -- Definitions, requirements and test methods
 
  1. Gypsum elements for suspended ceilings -- Definitions, requirements and test methods
 
  1. Timber structures -- Product requirements for prefabricated structural members assembled with punched metal plate fasteners
 
  1. Sanitary appliances -- Communal washing troughs
 
  1. Thermal insulation products for building equipment and industrial installations – Factory made mineral wool (MW) products -- Specification
 
  1. Thermal insulation products for building equipment and industrial installations – Factory made flexible elastomeric foam (FEF) products -- Specification
 
  1. Thermal insulation products for building equipment and industrial installations – Factory made cellular glass (CG) products -- Specification
 
  1. Thermal insulation products for building equipment and industrial installations – Factory made calcium silicate (CS) products -- Specification
 
  1. Thermal insulation products for building equipment and industrial installations – Factory made extruded polystyrene foam (XPS) products – Specification
 
  1. Thermal insulation products for building equipment and industrial installations – Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products -- Specification
 
  1. Thermal insulation products for building equipment and industrial installations -- Factory made products of expanded polystyrene(EPS) -- Specification
 
  1. Thermal insulation products for building equipment and industrial installations – Factory made polyethylene foam (PEF) products –Specification
 
  1. Thermal insulation products for building equipment and industrial installations – Factory made phenolic foam (PF) products -- Specification
 
  1. Thermal insulating products for buildings -- In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products -- Part 1: Specification for the rigid foam spray system before installation
  2.  
 
  1. Thermal insulation products for buildings -- In-situ thermal insulation formed from expanded perlite (EP) products -- Part 1: Specification for bonded and loose-fill products before installation
 
  1. Thermal insulation products for buildings-- In-situ thermal insulation formed from exfoliated vermiculite (EV) products – Part 1: Specification for bonded and loose-fill products before installation
 
  1. Thermal insulating products for buildings -- In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products -- Part 1: Specification for the rigid foam dispensed system before installation
 
  1. Thermal insulating products for building equipment and industrial installations -- In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products -- Part 1: Specification for the rigid foam dispensed system before installation
 
  1. Thermal insulating products for building equipment and industrial installations -- In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products -- Part 1: Specification for the rigid foam spray system before installation
 
  1. Glass in building -- Thermally toughened alkaline earth silicate safety glass -- Part 2: Evaluation of conformity/ Product standard
 
  1. Underground fire hydrants
 
  1. Wood flooring and parquet -- Characteristics, evaluation of conformity and marking
 
  1. Windows and doors -- Product standard, performance characteristics -- Part 1: Windows and external pedestrian doorsets
 
  1. Metal beads and feature profiles for use with gypsum plasterboards -- Definitions, requirements and test methods
 
  1. Timber structures -- Structural laminated veneer lumber -- Requirements
 
  1. Pillar fire hydrants
 
  1. Road traffic noise reducing devices -- Specifications
 
  1. Road traffic noise reducing devices -- Specifications
 
  1. Fixed ladders for manholes
 
  1. High strength structural bolting assemblies for preloading -- Part 1: General requirements
 
  1. Ceramic tiles -- Definitions, classification, characteristics, evaluation of conformity and marking
 
  1. Shower enclosures -- Functional requirements and test methods
 
  1. Glass in building -- Laminated glass and laminated safety glass -- Evaluation of conformity/Product standard
 
  1. Glass in building -- Laminated glass and laminated safety glass -- Evaluation of conformity/Product standard
 
  1. Chimneys -- System chimneys with plastic flue liners -- Requirements and test methods
 
  1. Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards -- Definitions, requirements and test methods
 
  1. Self-supporting double skin metal faced insulating panels -- Factory made products -- Specifications
 
  1. Baths for domestic purposes
 
  1. Shower trays for domestic purposes
 
  1. Bidets -- Functional requirements and test
  2. methods
 
  1. Timber structures -- Connectors -- Requirements
 
  1. Mechanical fasteners for gypsum plasterboard systems -- Definitions, requirements and test methods
 
  1. Timber structures -- Dowel-type fasteners -- Requirements
 
  1. Smoke alarm devices
 
  1. Calcium aluminate cement -- Composition, specifications and conformity criteria
 
  1. Calcium aluminate cement -- Composition, specifications and conformity criteria
 
  1. Adhesives for non-pressure thermoplastic piping systems -- Specifications
 
  1. Sanitary appliances -- Wash basins -- Functional requirements and test methods
 
  1. Flexible sheets for waterproofing -- Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete -- Definitions and characteristics
 
  1. Stretched ceilings -- Requirements and test methods
 
  1. Self-supporting metal sheet for roofing, external cladding and internal lining -- Product specification and requirements
 
  1. Fully supported metal sheet and strip for roofing, external cladding and internal lining -- Product specification and requirements
 
  1. Residential space heating appliances fired by wood pellets -- Requirements and test methods
 
  1. Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
 
  1. Adhesives for thermoplastic piping systems for fluids under pressure -- Specifications
 
  1. Precast concrete products – Stairs
 
  1. Precast concrete products -- Box culverts
 
  1. Building hardware -- Locks and latches -- Electromechanically operated locks and striking plates -- Requirements and test methods
 
  1. Fibres for concrete -- Part 1: Steel fibres -- Definitions, specifications and conformity
 
  1. Fibres for concrete -- Part 2: Polymer fibres -- Definitions, specifications and conformity
 
  1. Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives -- Requirements, test methods, evaluation of conformity, classification and designation
 
  1. Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives -- Requirements, test methods, evaluation of conformity, classification and designation
 
  1. Surfaces for sports areas -- Indoor surfaces for multi-sports use -- Specification
 
  1. Flexible sheets for waterproofing -- Plastic and rubber damp proof courses -- Definitions and characteristics
 
  1. Solid wood panelling and cladding -- Characteristics, evaluation of conformity and marking
 
  1. Thermal insulation and light weight fill products for civil engineering applications -- Factory made products of expanded polystyrene (EPS) -- Specification
 
  1. Thermal insulation and light weight fill products for civil engineering applications -- Factory made products of extruded polystyrene foam (XPS) -- Specification
 
  1. Roof coverings -- Continuous rooflights of plastics with or without upstands -- Classification, requirements and test methods
 
  1. Rigid underlays for discontinuous roofing -- Definitions and characteristics
 
  1. Flexible sheets for waterproofing -- Bitumen damp proof courses -- Definitions and characteristics
 
  1. Chimneys -- Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications -- Part 1: Vertical air/flue terminals for C6-type appliances
 
  1. Chimneys -- Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications -- Part 2: Flue and air supply ducts for room sealed appliances
 
  1. Precast concrete products -- Foundation elements
 
  1. Precast concrete products -- Wall elements
 
  1. Precast concrete products -- Beam-and-block floor systems -- Part 1: Beams
 
  1. Precast concrete products -- Beam-and-block floor systems -- Part 2: Concrete blocks
 
  1. Precast concrete products -- Beam-and-block floor systems -- Part 3: Clay blocks
 
  1. Precast concrete products -- Beam-and-block floor systems -- Part 4: Expanded polystyrene blocks
 
  1. Precast concrete products -- Beam-and-block floor systems -- Part 5: Lightweight blocks for simple formwork
 
  1. Non-preloaded structural bolting assemblies -- Part 1: General requirements
 
  1. Precast concrete products -- Bridge elements
 
  1. Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
 
  1. Aluminium and aluminium alloys -- Structural products for construction works -- Technical conditions for inspection and delivery
 
  1. Decorative wall coverings -- Roll and panel form
 
  1. Anti-seismic devices
 
  1. Ground granulated blast furnace slag for use in concrete, mortar and grout -- Part 1: Definitions, specifications and conformity criteria
 
  1. Slow heat release appliances fired by solid fuel -- Requirements and test methods
 
  1. Precast concrete products -- Retaining wall elements
 
  1. General purpose adhesives for structural assembly -- Requirements and test methods
 
  1. Structural adhesives -- Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
 
  1. Gypsum boards with fibrous reinforcement -- Definitions, requirements and test methods -- Part 1: Gypsum boards with mat reinforcement
 
  1. Gypsum boards with fibrous reinforcement -- Definitions, requirements and test methods -- Part 2: Gypsum fibre boards
 
  1. Agglomerated stone -- Modular tiles for flooring and stairs (internal and external)
 
  1. Agglomerated stone -- Slabs and tiles for wall finishes (internal and external)
 
  1. Bitumen and bituminous binders -- Framework for specifying cut-back and fluxed bituminous binders
 
  1. Hydraulic binder for non-structural applications -- Definition, specifications and conformity criteria
 
  1. Geotextiles and geotextile-related products -- Characteristics required for use in pavements and asphalt overlays
 
  1. Geosynthetic barriers -- Characteristics required for use in transportation infrastructure
 
  1. Precast concrete products -- Normal weight and lightweight concrete shuttering blocks -- Product properties and performance
 
  1. Structural finger jointed solid timber -- Performance requirements and minimum production requirements
 
  1. Precast concrete products -- Wood-chip concrete shuttering blocks -- Product properties and performance
 
  1. Thermal insulation products for building equipment and industrial installations – Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products -- Specification
 
  1. Thermal insulation products for building equipment and industrial installations -- In-situ thermal insulation formed from expanded perlite (EP) products -- Part 1: Specification for bonded and loose-fill products before installation
 
  1. Thermal insulation products for building equipment and industrial installations -- In-situ thermal insulation formed from exfoliated vermiculite (EV) products -- Part 1: Specification for bonded and loose-fill products before installation
 
  1. Ventilation for buildings -- Fire dampers
 
  1. Sealants for non-structural use in joints in buildings and pedestrian walkways -- Part 1: Sealants for facade elements
 
  1. Sealants for non-structural use in joints in buildings and pedestrian walkways -- Part 2: Sealants for glazing
 
  1. Sealants for non-structural use in joints in buildings and pedestrian walkways -- Part 3: Sealants for sanitary joints
 
  1. Sealants for non-structural use in joints in buildings and pedestrian walkways -- Part 4: Sealants for pedestrian walkways
 
  1. Glass in Building -- Basic alumino silicate glass products -- Part 2: Product standard
 
  1. Glass in building -- Heat soaked thermally toughened alkaline earth silicate safety glass -- Part 2: Evaluation of conformity/Product standard
 
  1. Glass in building -- Thermally toughened soda lime silicate channel shaped safety glass -- Part 2: Evaluation of conformity/Product standard
 
  1. Light weight fill and thermal insulation products for civil engineering applications (CEA) -- Expanded clay lightweight aggregate products (LWA)
 
  1. Supersulfated cement -- Composition, specifications and conformity criteria
 
  1. Polymer modified bituminous thick coatings for waterproofing -- Definitions and requirements
 
  1. Multi-firing sauna stoves fired by natural wood logs -- Requirements and test methods
 
  1. Specifications for external renders and internal plasters based on organic binders
 
  1. Pedestrian doorsets, industrial, commercial, garage doors and openable windows -- Product standard, performance characteristics -- Fire resisting and/or smoke control characteristics
 
  1. Thermal insulation products for buildings -- Factory made products of polyethylene foam (PEF) -- Specification
 
  1. Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings -- Requirements and test methods
 
  1. Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings -- Requirements and test methods
 
  1. Power, control and communication cables -- Cables for general applications in construction works subject to reaction to fire requirements
 
  1. Power, control and communication cables -- Cables for general applications in construction works subject to reaction to fire requirements